How to Turn on Outdoor Water Fountain after Winter

How to Turn on Outdoor Water Fountain after Winter

Fountain users advise keeping the fountain motor running at all times, as turning it off can cause permanent damage to the pump. But running an outdoor fountain in winter causes permanent damage to the fountain motor and outdoor fountain body. Outdoor fountains should be cleaned and tidied in early winter to prevent winter damage. Because storing the outdoor fountain will not damage the fountain during the winter, and you can easily assemble the outdoor fountain after the winter. Knowing how to turn on an outdoor water fountain is important for the fountain to function well after winter.

Before turning on the fountain, knowing the rules for cleaning outdoor fountains is important. Because if the outdoor fountain is not cleaned properly when the fountain opens after winter, various kinds of trouble are created.

Rules for winterizing an outdoor fountain

  1. A problem in winter is the freezing of fountain water. Consequently, a direct current connection can damage the fountain’s pumping system. This causes damage to the pump. So unplug it at the start of winter, as it will protect the pump and pump cord.
  2. Temperatures are below-freezing in winter, and we know that water expands at freezing temperatures. As a result, water that expands at this temperature can cause cracks inside your fountain. You must remove all water from the fountain to save your fountain from this damage.
  3. Keep critical connections open when needed. Dry the fountain thoroughly by leaving all parts of the fountain open. Once thoroughly dry, use a towel on the basin to absorb water and prevent damage.
  4. If your fountain is not overly large and heavy, you will need to remove the fountain from the garden. If it is large and cannot move safely, tie it down carefully using rope and a tarp. Make sure it is properly restrained. Because if water gets inside the fountain, repeated freezing and melting can cause more damage to the fountain.

Rules for Turning on Outdoor Fountains after Winter

Snow and ice begin to melt in an early fountain after winter. The birds return, and slowly the plants wake up to new life. Now is the perfect time to care for and decorate your outdoor space. Spring is the perfect time to restart your fountain after winter. Below are four ways to turn on the fountain after winter.

How to Turn on Outdoor Water Fountain after Winter

1. Remove Accumulated Ice

Even though winter is over many times, there is still a hint of winter in the fountain—for example, sometimes snow or ice forms in springs. If so, turn on the faucet very quickly. It is best to remove as much ice from the fountain as possible. Also, if there is ice, pour hot water on the fountain. Add hot water until the rest of the ice melts. Then remove the accumulated water with a towel or cloth. Also, place a dry towel or dry sackcloth in the fountain basin in heavy snowfalls. Fountains should be cleaned before the ice melts and freezes.

2. Remove Remaining Debris

Throughout the winter, these storms and other factors can pull twigs, leaves, or pine needles into the catch basin. Tia needs to remove this debris. If necessary, the basin of the fountain should clean with a brush. At this point, you can check for limestone buildup in the fountain. You can test directly with a soft sponge before turning on the fountain for accurate results.

3. Add the Pump

If everything is fine after cleaning, now the fountain ice pumping motor’s life should be installed. The pump can be connected to any tubing where the fountain has a water source or where the basin is located. It is also time to install LED lights to make reservoirs and waterfalls attractive.

4. Add Water

The last step in adding a pump is to add water to the fountain basin. Adjust the water container and fill it with the right amount of water. In it until it is filled and fixed at the specified speed of the fountain. Also, you can change the direction of the water flow.

Outdoor Fountain Troubleshooting after Winter

How to Turn on Outdoor Water Fountain after Winter

1. Whether the Installation is Being Connected to the Main Circuit

An outdoor fountain should have a symmetrical flow. Because if the current of the pumping motor increases or decreases suddenly, it damages the pumping circuit. Circuit breakers and power supplies should be checked occasionally. If you don’t have the test kit or the right equipment, you must buy it. A ground fault interrupter can be used to maintain the current level. In addition, the GFI mode has a reset and test button that can use when operating in trial mode. After connecting the manual, if it does not turn on or any problem occurs, take the help of the nearest electrician.

2. Mechanical Failure of the Pump

This type of problem is mainly due to genetic reasons. If this type of problem occurs, the first thing to do is to check the GFI. Sometimes the conventional source cannot provide enough power to the pump. If you need voltage on the pump side, measure the spring first. Then you can change the pump to create the same type of jet. To check the pump’s electricity, use an amp meter at 120v. 

3. The Motor Makes Noise but Does Not Work

Sometimes a noise is created due to a mechanical fault in the pumping motor, which drowns out the sound of water splashing in outdoor fountains. Sometimes a small object or pebble can get stuck in the impeller and create such a noise. Contact the manufacturer if a newly purchased fountain motor pump produces a whirring sound. Sometimes the pump may have a technical problem, so you can replace it if it is covered by warranty.

Above mentioned are several aspects of fountains that need to be replaced after winter maintenance, and fountains will have problems. It is expected that if all these steps and processes are properly maintained, the outdoor fountain will become an oasis in your garden.

Related Articles