How to Clean a Fountain with Vinegar

How to Clean a Fountain with Vinegar

To maintain the beauty of the fountain, it is important to keep it clean. If the fountain is not cleaned, the fountain gets damaged, and the dirt accumulates in the fountain, spoiling the beauty of the fountain. Regular fountain cleaning does not accumulate more dirt, making it easier to clean later. But hard stains on fountains are difficult to clean. Use chlorine bleach chemicals to clean hard stains. But using chlorine bleach often destroys the colour of the fountain. Chlorine bleach is good for large fountains because it does not damage the outdoor fountain. But vinegar works best for cleaning small tabletop fountains. Below we will show you how to clean a fountain with vinegar.

Which type of dirt should clean with vinegar?

Cleaning indoor fountains with vinegar is best because indoor fountains are smaller in size. Distilled water is used in indoor fountains so that the amount of dirt in the fountain is less. So the fountain can easily clean with vinegar. Also, cleaning with vinegar prevents algae growth in the fountain if the algae in the fountain are low. It is best not to use vinegar to clean old stains; also, it does not clean the fountain well. It is best to use vinegar to clean fountains that have painted surfaces. If the outdoor fountain is less dirty, using vinegar to clean it is better. All in all, it is better to clean the fountain with vinegar if there is less dirt or to maintain the beauty of the fountain.

Benefits of cleaning fountains with vinegar

  1. Cleaning the fountain with vinegar does not discolour the fountain.
  2. Vinegar is environment friendly, so cleaning water fountains with it does not harm the environment.
  3. Vinegar does not contain chemicals, so animals or birds will not harm if they drink the fountain water.
  4. It is best to clean the fountain with vinegar to reduce the number of algae.

Needed Supplies

Equipment / Tools: Scrub brush, Rubber gloves, Pressure attachment hose (optional).

Materials: Water, Apple Vinegar.

Rules and timing of mixing

To clean fountain algae, mix clean water with chlorine bleach. Keep the water and chlorine bleach ratio to 9:1. If the basin size is large, take a little more of the mixture. If the amount of algae is less, you can use baking soda.

Instructions

1. Remove the Dirt and Pump from the Fountain

Drain all the water from the fountain to clean the fountain with vinegar. After draining the water, remove the dirt accumulated in the fountain basin. Then remove the motor and water flow tube from the fountain.

2. Clean the Fountain Pump and Tube

After removing the motor and tube, please place them in vinegar. Clean the motor and tube with a scrub brush after leaving it for 10 minutes. To enhance the beauty of the fountain, if you use decorative rocks in the fountain, it must be cleaned. To clean the rock should clean according to the same rules for cleaning the motor. If you haven’t cleaned the fountain motor for a long time, chlorine bleach should use because the dirt will be hard inside the motor if the cleaning is delayed.

3. Scrub Basin with a Vinegar

To clean a fountain basin with vinegar, sprinkle the vinegar mixture all over the basin. To clean the exterior of the fountain, apply the same mixture all over the fountain. After applying the vinegar to all parts, cover the fountain for 30 min. Then when all the dirty spots on the fountain are softened, scrub the entire fountain with a scrub brush.

4. Rinse the Water Fountain

After scrubbing the fountain well, rinse the fountain with clean water. After washing, if you see small hard spots in the fountain, pour vinegar on those hard spots and rub them well. Then rinse the fountain again with clean water. After washing, you will see the beauty of the fountain increase.

5. Dry the Water Fountain

After cleaning the fountain, dry the fountain well in the sun. However, cleaning fountains with vinegar requires drying because vinegar does not contain chemicals. However, it is better to dry the fountain thoroughly in the sun to keep algae and hard stains away from the fountain for a long time.

6. Turn on the water Fountain

After the water fountain is thoroughly dry, reassemble the fountain. Set the motor in the basin with enough water to keep the motor submerged. When everything seems to be well set, turn on the fountain and enjoy the sound of flowing water.

Related Articles